You are here : Home -> Products -> DIY KIT Series -> GACON Series DIY Kit
Gigabit DIY Kit GACON Series DIY Kit

Description
The GACON Series is 1000Base-TX UTP (Unshielded Twisted Pair) to 1000Base-X POF (Plastic Optical Fiber) converter. The GACON Series includes Ethernet (RJ-45) connectors and OptoLock® or SMI POF transceivers. It supports full-duplex and high-speed data transmission in POF interface. LED indicators are used to display power status of converter, link/ active status of OptoLock® or SMI POF port. This product is really plug-and-play and requires no additional settings. The GACON Series are fully compatible for IEEE 802.3z Fast Ethernet data communication standard. Their solutions are in any Fast Ethernet LAN, FTTH or xDSL application.

Inquiry

Datasheet


facebook twitter plurk msn
Package Inculde
  1. GACON Series Media Converter……………….……....... 2 Pcs
  2. AC adapter……………………………………………………….....　2 Pcs
  3. UTP cable 40cm ………………………………………………....　2 Pcs
  4. POF cable 30 meters ……………………………………...…..　1 Pcs
  5. POF cable cutter……………………………………………………　1 Pcs
Key Features
  1. Fully comply with IEEE 802.3ab & IEEE 802.3z, 1000Base-T and 1000Base-X.
  2. Support one 1000Base-T RJ-45 port and one 1000Base-X OptoLock® or SMI connector.
  3. Transmit signal up to 3 meters SI-POF or 30 meters GI-POF that meet IEEE 1394b Std.
  4. Display converter status by LED indicators.
  5. Support 1000Mbps and full/ half-duplex operation at RJ-45 port.
  6. Support 1000Mbps and full duplex operation at fiber port.
  7. Very low power consumption.
  8. Plug-and-play and easy installation.
Specification
Parameter Optical Port Electrical Port
Standard compatibility 1000Base-X 1000Base-T
Data Rate 1000Mbps 1000Mbps
Transmitting Length
  1. 3M at SI-POF interface.
  2. 30M at GI-POF interface.
 1000Mbps at copper interface
Interface connector
  1. OptoLock® POF transceiver
  2. SMI POF transceiver
 RJ-45 connector
Equipped cable Optolup® OptoLock® or SMI POF patch cord 4 pairs CAT3/ CAT5/ CAT6 UTP or STP patch cord
LED Indication Power status, POF port link/ active status.
Operating Environment Temperature: 0~50 °C Humidity: 10%~90%
Storage Environment Temperature: -40~70 °C Humidity: 10%~90%(Non-condensing)
Operating Power 5V @ 1A Max.
Power Consumption 5 W Max.
DC Power Connector OD: 5.5, ID: 2.1 mm DC plug suitable
Dimensions (W x D x H) 79.7 mm x 55 mm x 23 mm
Total Weight TBD
EMC Certification FCC certification: Part 15 Subpart B 2. CE certification: EN55022/ 55024/ 61000-3-2/ 61000-3-3

*All specifications are subject to change without notice.
Applications

Gigabit DIY Kit application
Gigabit DIY Kit application

LED Indications
Gigabit DIY Kit indication
LED Color Status Function
PWR Red ON When input power is detected.
LINK Yellow ON When Fiber &UTP ports have been connected.
ACT Green Blink When any packet is transmitting.

Order Information

DIY Kit - 1000



Converter Type
  • 1000: Throughputs 1000Mbps

OptoLock® is a registered trade mark of Firecomms