You are here : Home -> Products -> Media Converter series -> FEPCI-O21
FECON-O21

Description
The FECON Series is 10/100Base-TX UTP (Unshielded Twisted Pair) to 100Base-FX POF (Plastic Optical Fiber) converter. The FECON Series includes Ethernet (RJ-45) connectors and OptoLock® POF transceivers. It supports full-duplex and high-speed data transmission in POF interface. LED indicators are used to display power status of converter, link/ active status of FX port and link/ active status of RJ-45 port. This product is really plug-and-play and requires no additional settings. The FECON Series are fully compatible for IEEE 802.3u Fast Ethernet data communication standard. Their solutions are in any Fast Ethernet LAN, FTTH or xDSL application.

Inquiry

Datasheet


facebook twitter plurk msn
Specification
Parameter Optical Port Electrical Port
Standard compatibility
  1. IEEE 802.3u Fast Ethernet
  2. 100Base-FX
  1. IEEE 802.3u Fast Ethernet
  2. 10/100 Base-TX
Data Rate 100 Mbps 10/100 Mbps
Transmitting Length 50M at POF interface 100M at copper interface
Interface connector OptoLock® POF transceiver (COMOSS OLKDX series) RJ-45 connector (meet EIA-568)
Equipped cable OptoLock® POF patch cord 4 pairs CAT3/ CAT5/ CAT6 UTP or STP patch cord
LED Indication Power status, FX link/ active status and TX link/ active status
Operating Environment Temperature: 0~50 °C Humidity: 10%~90%
Storage Environment Temperature: -40~70 °C Humidity: 10%~90%(Non-condensing)
Operating Power 5V/1A Max.
Power Consumption 5 W Max.
DC Power Connector OD: 5.5, ID: 2.1 mm DC plug suitable
Dimensions (W x D x H) 75 x 55 x 22.5 mm
Total Weight 60g
EMC Certification FCC certification: Part 15 Subpart B 2. CE certification: EN55022/ 55024/ 61000-3-2/ 61000-3-3

*All specifications are subject to change without notice.

Key Features
  1. Fully comply with IEEE 802.3u, 10/100Base-TX and 100Base-FX.
  2. Support one 10/100Base-TX RJ-45 port and one 100Base-FX OptoLock® or connector.
  3. Transmit signal up to 50 meters POF that meet IEEE 1394b Std.
  4. Display converter status by LED indicators.
  5. Support 10Mbps/ 100Mbps and full/ half-duplex operation at RJ-45 port.
  6. Support 100Mbps and full duplex operation at OptoLock® port.
  7. Plug-and-play and easy installation.
  8. Low power consumption and Low cost.
  9. MTBF: 35,000 hours
Applications
USB dongle lan card application
application
LED Indications
POF Optolup Cable indication
LED Color Status Function
PWR Red ON When input power is detected.
FX ACT Yellow ON If connection of POF is good.
FX LINK Green Blink When any FX packet is transmitting.
TX ACT Yellow ON If connection of copper cable is good.
TX LINK Green Blink When any TX packet is transmitting.

Order Information

FECON - O 2 1



(1) Converter Type
  • S : SMI POF interface
  • O : OptoLock® Plugless POF interface
(2) Connector Type
  • 2 : One 2.2mm Optolock Transceiver(Black Color) and One Ethernet (RJ45) Connector
(3) Color of Case
  • 1 : With Black Color Case

OptoLock® is a registered trade mark of Firecomms