You are here : Home -> Products -> Switch hub Series -> POF-24O1Y
100Mbps POF switch hub 24 port PSW-24O1Y

Description
The PSW Series offers 24-Port 100Base-FX POF Ethernet Switch and 2 Gigabit UTP & SFP combo ports. It supports full-duplex operations at its fiber-optic interface in the form factor of OptoLock® interface. The two Gigabit UTP and SFP ports can be either 1000Base-T for 10/100/1000Mbps or 1000Base-SX/LX through SFP (Small Factor Pluggable) interface, which provide high bandwidth and performance for Ethernet up link. PSW Series embedded web management interface. With a fixed configuration format, the PSW Series is fully plug-and-play designed to operate out-of-the-box with the minimum amount of user configuration. PSW Series is easy to use and manage, designed to increase business productivity by reliably supporting business applications.

Inquiry

Datasheet


facebook twitter plurk msn
Specification
Product POF-2402GS
Hardware Specification
Ports 24 100Base-FX POF OptoLock® connector/Multi-mode
(650nm wavelength)
Connector Type OptoLock®
Gigabit ports 2 Gigabit ports
1000Base-SX/LX SFP/mini-GBIC Slot,
or 1000Base-T RJ-45
Switch Processing Scheme Store-and-forward
Throughput(packet per second) 3.571 Mpps
Switch fabric 4.8 Gbps
Address Table 4K entries
Share data Buffer 2 Mbits
Maximun Transmit Unit 1536 Bytes
Flow Control Back pressure for Half-Duplex, IEEE 802.3x Pause Frame for Full-Duplex
Power Input 5V/4A internal AC Adapter
Dimension 19-inch, 1U Rack-mount size
440mm x 140mm x 44mm
Cabling UTP:Cat. 5/5e/6 UTP cable 100m
Fiber:
Plastic Optical Fiber cable, up to 50nm
50μ, 62.5μ/125 Micron Multimode Fiber,
9μMicron Single mode Fiber
Layer 2 Function
System Configuration Web interface
Port Status
  • Display per port’s disable/enable status
  • Per Port’s link status and speed duplex mode
  • Per Port’s Flow control status
Port Configuration
  • Per port disable/enable
  • Auto-negotiation disable/enable.
  • Flow control disable/enable
  • Bandwidth control on each port
Trunk Configuration Support 3 groups of 4-Port trunk
VLAN Configuration
  • IEEE 802.1Q Tag-Based VLAN
  • Port-based VLAN supports maximum up to 32 VLAN groups
Port Monitoring One Mirroring port to monitor one mirrored port.
The monitor modes are RX, TX and RX & TX
QoS Configuration
  • Static port priority and IEEE 802.1p Class of Service (CoS) with 2-level
    priority queuing
  • TCP/UDP based Port QoS control
Multicast IGMP Snooping v1 and v2
Up to 32 multicast groups

Security
  • IP Security / Filter, up to 26 rules
  • MAC Filter, Up to 4 entries
Port counters Display detail traffic counters on each port
Standards Conformance
Regulation Compliance FCC Part 15 Class A, CE 
RoHS
Standards Compliance IEEE 802.3
IEEE 802.3u
IEEE 802.3ab
IEEE 802.3z
IEEE 802.3x
IEEE 802.3q
IEEE 802.3p

Ethernet
Fast Ethernet
Gigabit Ethernet
Gigabit Ethernet
Full-duplex flow control
Tag-Based VLAN
Class of Service

*All specifications are subject to change without notice.

Key Features
  1. 24-Port 100Base-FX OptoLock®.
  2. 2-Port Gigabit UTP+SFP ports.
  3. Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3z and IEEE 802.3ab Gigabit Ethernet standard.
  4. Auto-MDI/MDI-X detection on each RJ-45 port.
  5. 4K MAC address table.
  6. Port-Based VLAN and IEEE 802.1Q Tagged VLAN.
  7. Static Port Trunk.
  8. IGMP snooping v1 and v2 for Multi-media application.
  9. Broadcast storm filter.
  10. Port mirroring allows monitoring of the traffic across any port in real time
  11. Supports QoS and bandwidth control on each port
  12. IEEE 802.1p class of service ; support Strict and WRR mode
  13. IEEE 802.1p class of service ; support Strict and WRR mode
  14. MAC Address Filter
  15. IP Address Filter
  16. TCP/UDP Filter
  17. Firmware upgrade by HTTP file transfer protocol through Ethernet network
  18. Embedded web management interface.
  19. Support plug-and-play.
  20. EMI standards comply with FCC, CE class A.
Applications

 

USB dongle lan card application

LED Indications

100Mbps POF switch hub 24 port LED
100Mbps POF switch hub 24 port LED

LED Color Status Function
Link/Act Blue Blink When any FX packet is transmitting.
Power Blue ON Lights to indicate that the Switch has power.
System Requirements
  1. Please make sure have Ethernet controller in your devices or systems.
  2. Please confirm that Ethernet controllers are able to work normally in systems.
  3. If you have already installed Ethernet controller and work normally, there is no special hardware requirement such as CPU speed, memory size and chipsets.
  4. If you have already installed Ethernet in your OS, there is no special software requirement.
  5. The technical advice for the AC to DC power adapter
    The PSW series have been designed to use external 5V~35V power adapter to supply.
 User’s Guide
  1. Please keep the following procedure to install. If the sequences are not correctly followed, the improper or no operation will be occurred.
  2. Make sure your Ethernet controller work normally between two systems.
  3. Plug the CAT5 patch cord into the systems and PSW. Don’t use any intermediate cable or adapter between PSW and systems.
  4. Plug the POF END patch cord into two PSW. Don’t use any intermediate cable or adapter between two PSW.
  5. Plug the power adapter into your PSW.
  6. The yellow and green indicator of PSW shine or flash. This condition mean the Ethernet connection between two systems is started.
  7. If PSW don’t work normally (yellow or green indicator dark), you must confirm (2)~(5)again. Afterward restart your PSW again.
    *when fiber optic line insert the switch fiber port that the Light Emiting Doide's yellow light and green light will be poerate.
Troubleshooting
  1. The PSW are not energized. (Yellow or Green indicator dark)
    1.1 Make sure if OptoLock® and CAT5 patch cord are certainly plugged in receptacle.
    1.2 Confirm if power adapter work normally.
    1.3 Confirm if the operations of Step User’s Guide(2)~(6)are correct.
  2. If there is any technical issue, please contact with our sales department (Sales@comoss.com.tw).

Order Information

PSW - 24 O 1 Y



(1)
  • 24 : 24 POF Ports
(2) Converter Type
  • O : OptoLock® POF interface
(3) Diameter of Converter Type
  • 1 : 2.2mm OptoLock® transceiver (Black color)
(4) Color of case
  • Y : with white color

OptoLock® is a registered trade mark of Firecomms