You are here : Home -> Products -> Switch hub Series-> PSW-8O1X1
8 PORT 2 POF + 6 RJ Switch hub PSW-8O1X1

Description
The PSW-8O1X1 series are 10/100Base-TX copper to 100Base-FX POF (Plastic Optical Fiber) converter. The PSW-8XXXX includes Ethernet (RJ-45) connectors and OptoLock® POF transceivers. The PSW-8XXXX series are treated as IEEE 802.3u Fast Ethernet repeaters. The PSW-8XXXX series are fully compatible for IEEE 802.3u Fast Ethernet data communication standard. Their applications are in any CE devices of the Ethernet home network such as PC and consumer electronic devices.

Inquiry

Datasheet


facebook twitter plurk msn
Specification
Parameter Optical Port Electrical Port
Standard compatibility IEEE 802.3u Fast Ethernet
100 Base-FX		 IEEE 802.3u Fast Ethernet
10/100 Base-TX
Data Rate 100 Mbps 10/100 Mbps
Transmitting Length 50M at POF interface 100M at copper interface
Interface connector OptoLock® POF transceiver RJ-45 connector
(meet EIA-568)
Equipped cable POF patch cord 4 pairs CAT3/ CAT5/ CAT6 UTP or STP patch cord
Operating Temperature 0~70 °C
Operating Voltage 12V DC
Operating Current 0.3A DC max.
DC Power Connector OD: 5.5, ID: 2.1 mm DC plug suitable

*All specifications are subject to change without notice.

Key Features
  1. Integrate 2 ports OptoLock® or SMI optical fiber transceiver.
  2. All port supports 100Base-FX with flow control.
  3. Supports broadcast storm filtering function.
  4. Supports 1536/1552 byte maximum packet length.
  5. Plug-and-play and easy installation.
  6. Low power consumption and low cost.
Applications

8 PORT 2 POF + 6 RJ Switch hub application

 

USB dongle lan card application

8 PORT 2 POF + 6 RJ Switch hub indication
LED Color Status Function
Power Yellow ON Lights to indicate that the Switch has power.
Link/Act Green Blink When any FX packet is transmitting.
System Requirements
  1. Please make sure have Ethernet controller in your devices or systems.
  2. Please confirm that Ethernet controllers are able to work normally in systems.
  3. If you have already installed Ethernet controller and work normally, there is no special hardware requirement such as CPU speed, memory size and chipsets.
  4. If you have already installed Ethernet in your OS, there is no special software requirement.
  5. The technical advice for the AC to DC power adapter
    The PSW series have been designed to use external 5V~35V power adapter to supply.
 User’s Guide
  1. Please keep the following procedure to install. If the sequences are not correctly followed, the improper or no operation will be occurred.
  2. Make sure your Ethernet controller work normally between two systems.
  3. Plug the CAT5 patch cord into the systems and PSW. Don’t use any intermediate cable or adapter between PSW and systems.
  4. Plug the POF END patch cord into two PSW. Don’t use any intermediate cable or adapter between two PSW.
  5. Plug the power adapter into your PSW.
  6. The yellow and green indicator of PSW shine or flash. This condition mean the Ethernet connection between two systems is started.
  7. If PSW don’t work normally (yellow or green indicator dark), you must confirm (2)~(5)again. Afterward restart your PSW again.
    *when fiber optic line insert the switch fiber port that the Light Emiting Doide's yellow light and green light will be poerate.
Troubleshooting
  1. The PSW are not energized. (Yellow or Green indicator dark)
    1.1 Make sure if OptoLock® and CAT5 patch cord are certainly plugged in receptacle.
    1.2 Confirm if power adapter work normally.
    1.3 Confirm if the operations of Step User’s Guide(2)~(6)are correct.
  2. If there is any technical issue, please contact with our sales department (Sales@comoss.com.tw).

Order Information

PSW - 8 O 1 X 1



  • 8 : 8 POF Ports
(1) Converter Type
  • O : OptoLock® POF interface
(2) Diameter of Converter Type
  • 1 : 2.2mm OptoLock® transceiver (Black color)
(3) Color of case
  • X : with black color
(4) Accessory
  • 1 : with 110/220VAC to 5VDC adapter

OptoLock® is a registered trade mark of Firecomms