You are here : Home -> Products -> Switch hub Series -> GAPSW-O111
8 PORT Giga Switch HUB GAPSW-O111

Description
The GAPSW Series Switch are 1000Base-X POF (Plastic Optical Fiber) and SFP(1000Base-LX, 1000Base-SX) GOF module, 1000Base-TX UTP converter. The GAPSW Series Switch includes Ethernet (RJ-45) connectors and OptoLock® POF transceivers. The GAPSW Series Switch are treated as IEEE 802.3ab ane IEEE 802.3z Fast Ethernet repeaters. The GAPSW Series Switch are fully compatible for IEEE 802.3ab ane IEEE 802.3z Fast Ethernet data communication standard.

Inquiry

Datasheet
Specification
Parameter Optical Port Electrical Port
tandard compatibility
  1. IEEE 802.3z
  2. 100 Base-FX
  3. 1000 Base-X
  1. IEEE 802.3ab
  2. 1000Base-T
Data Rate
  1. 100Mbps(1~8 Port)
  2. 1Gbps(1~2Giga port)
 1Gbps
Transmitting Length 50M at POF interface 100M at copper interface
Interface connector OptoLock® POF transceiver RJ-45 connector
Equipped cable Optolup® OptoLock® patch cord. 4 pairs CAT3/ CAT5/ CAT6 UTP or STP patch cord
LED Indication Power status, POF port link/ active status and UTP Port link/ active status

Operating Environment

 Temperature: 0~50 °C Humidity: 10%~90%
Storage Environment Temperature: -40~70 °C Humidity: 10%~90%(Non-condensing)
Operating Power 12V DC @ 1.5A Max.
Power Consumption 18 W Max.
DC Power Connector OD: 5.5, ID: 2.1 mm DC plug suitable
Dimensions (W x D x H) 280 x 150 x 26 mm
Total Weight T.B.D.
EMC Certification FCC certification: Part 15 Subpart B 2. CE certification: EN55022/ 55024/ 61000-3-2/ 61000-3-3

*All specifications are subject to change without notice.

Key Features
  1. Integrate 8 ports OptoLock® 100Base-FX optical fiber transceivers.
  2. Integrate 1 of UTP port which is dual-personality 10/100/1000 or SFP Gigabit ports.
  3. Integrate 1 of UTP port which is dual-personality 10/100/1000 or gigabit POF ports.
  4. Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3z and IEEE 802.3ab Gigabit Ethernet standard.
  5. All port supports flow control.
  6. Supports broadcast storm filtering function.
  7. Supports 1536/1552 byte maximum packet length.
  8. Optional Web Management Interface.
  9. IGMP Protocol support.
  10. VLAN function support.
  11. TRUNK function support.
  12. Flow control with every port.
  13. Basic QOS function support.
Applications

8 PORT Giga Switch HUB application

 

USB dongle lan card application

Features
Parameter Optical Port Electrical Port
Standard compatibility IEEE 802.3u Fast Ethernet 100 Base-FX IEEE 802.3u Fast Ethernet 10/100 Base-TX
Data Rate 100 Mbps 10/100 Mbps
Transmitting Length 50M at POF interface 100M at copper interface
Interface connector OptoLock® POF transceiver RJ-45 connector(meet EIA-568)
Equipped cable POF patch cord 4 pairs CAT3/ CAT5/ CAT6 UTP or STP patch cord
Operating Temperature 0~70 °C
Operating Voltage 5V DC
Operating Current 0.5A DC max.
DC Power Connector OD: 5.5, ID: 2.1 mm DC plug suitable
LED Indications

8 PORT Giga Switch HUB indication

Power Firmware status 1 2 3 4 5 6 7 8 G2 G1 Port No.


Port Type LED Color Status Function
POF Ports Link Green ON 100 Mbps
Act Green Blink When any packet is transmitting.
Giga Ports Link Green ON/Slowly Blink(UTP)/Off(UTP) 1000Mbps/100Mbps(UTP)/10Mbps(UTP)
Act Green Blink When any packet is transmitting.
System Requirements
  1. Please make sure have Ethernet controller in your devices or systems.
  2. Please confirm that Ethernet controllers are able to work normally in systems.
  3. If you have already installed Ethernet controller and work normally, there is no special hardware requirement such as CPU speed, memory size and chipsets.
  4. If you have already installed Ethernet in your OS, there is no special software requirement.
  5. The technical advice for the AC to DC power adapter
    The GAPSW series have been designed to use external 5V~35V power adapter to supply.
 User’s Guide
  1. Please keep the following procedure to install. If the sequences are not correctly followed, the improper or no operation will be occurred.
  2. Make sure your Ethernet controller work normally between two systems.
  3. Plug the CAT5 patch cord into the systems and GAPSW. Don’t use any intermediate cable or adapter between GAPSW and systems.
  4. Plug the POF END patch cord into two PSW. Don’t use any intermediate cable or adapter between two GAPSW.
  5. Plug the power adapter into your GAPSW.
  6. The yellow and green indicator of GAPSW shine or flash. This condition mean the Ethernet connection between two systems is started.
  7. If GAPSW don’t work normally (yellow or green indicator dark), you must confirm (2)~(5)again. Afterward restart your GAPSW again.
    *when fiber optic line insert the switch fiber port that the Light Emiting Doide's yellow light and green light will be poerate.
Troubleshooting
  1. The GAPSW are not energized. (Yellow or Green indicator dark)
    1.1 Make sure if OptoLock® and CAT5 patch cord are certainly plugged in receptacle.
    1.2 Confirm if power adapter work normally.
    1.3 Confirm if the operations of Step User’s Guide(2)~(6)are correct.
  2. If there is any technical issue, please contact with our sales department (Sales@comoss.com.tw).

Order Information

GAPSW - O 1 1 1



(1) Converter Type
  • O : OptoLock® POF interface
(2) Diameter of Transceiver Type
  • 1 : 2.2mm OptoLock® transceiver (Black color)
(3) Gigabit Transceiver Core Size
  • 1 : 1mm Large Core Size OptoLock® Gigabit Transceiver
(4) WMI
  • 1 : With web management interface embedded

OptoLock® is a registered trade mark of Firecomms