You are here : Home -> Products -> FEUSB-O22
USB dongle lan card FEUSB-O22

Description
The FEUSB Series is USB2.0 to 100Base-FX POF (Plastic Optical Fiber) to 100M Fast Ethernet controller is a high performance and highly integrated ASIC which enables low cost, small form factor, and simple plug-and-play Fast Ethernet network connection capability for desktops, laptop PC’s, Ultra-Mobile PC’s, and any embedded system using a standard USB port. LED indicators are used to display power status of converter, link/ active status of FX port and link/ active status of POF port. This product is really plug-and-play and requires no additional settings. The FEUSB Series are fully compatible for IEEE 802.3u Fast Ethernet data communication standard.

Inquiry

Driver

Datasheet


facebook twitter plurk msn
Specification
Parameter Optical Port Electrical Port
Standard compatibility
  1. IEEE 802.3 Fast Ethernet
  2. IEEE 802.3 Full Duplex Flow Control
 Integrates on-chip USB 2.0 transceiver and SIE compliant to USB Spec 1.1 and 2.0
Data Rate 100 Mbps 480 Mbps
Transmitting Length 50M at POF interface  
Interface connector OptoLock® or SMI POF transceiver USB A type or B type connector (Optional)
Equipped cable OptoLock® or SMI POF patch cord (Optional) USB B type to A type cable (Optional)
LED Indication Power status, FX link/ active status.
Operating Environment Temperature: 0~50 °C Humidity: 10%~90%
Storage Environment Temperature: -40~70 °C Humidity: 10%~90%(Non-condensing)
Dimensions (W x D x H) 70 x 35 x 18 mm
Total Weight 100g
EMC Certification
  1. FCC certification: Part 15 Subpart B
  2. CE certification: EN55022/ 55024/ 61000-3-2/ 61000-3-3

*All specifications are subject to change without notice.

Key Features
  1. Integrates on-chip USB 2.0 transceiver and SIE compliant to USB Spec 1.1 and 2.0.
  2. Supports USB Full and High Speed modes with Bus-Power or Self-Power capability.
  3. High performance packet transfer rate over USB bus using proprietary burst transfer mechanism (submitted for US patent application).
  4. Supports USB to Ethernet bridging or vice versa in hardware.
  5. Support 100Mbps full duplex operation.
  6. Supports power down mode.
  7. Supports operation under Link Down Power Saving mode.
  8. Supports repeater mode.
  9. Network Status LEDs.
  10. Power management capabilities for ACPI 1.0 compliant systems.
  11. Wake On LAN support.
  12. Display converter status by LED indicators.
  13. Plug-and-play and easy installation.
  14. Low power consumption and Low cost.
Applications

USB dongle lan card application
USB dongle lan card application

LED Indications
USB dongle lan card indication
  LED Color Status Function
LED1 PWR Green ON When connection & power are both good.
LED2 FX ACT Yellow Blink When any FX packet is transmitting.
System Requirements
  1. Please make sure your PC or Laptop and device support USB slot.
  2. There is no special hardware requirement such as CPU speed, memory size and chipsets.
Driver
  1. FEUSB Series : Download

Order Information

FEUSB - O 2 2



(1) Converter Type
  • O : OptoLock® Plugless POF interface
(2) POF Cable O.D.
  • 2 : 2.2mm OptoLock® Transceiver. Black color
(3) USB Port
  • 2 : B type USB connector with B type USB cable

OptoLock® is a registered trade mark of Firecomms